Products / Filter Block

Filter block retains the ability to accept most STD accessories of a SBC but with features of a full race cylinder block

• Cast from virgin A356 T6 aluminium
• Priority mains oiling
• Tapered main webs
• Billet steel caps ductile
• Darton ductile iron sleeves
• A1 fasteners
• Standard cam location

 

This block is available as the following configurations:

• 350 mains 3.980" bore 9,025" deck STD cam bearing
• 350 mains 4.115" bore 9.025" deck STD cam bearing
• 400 mains 3.980" bore 9.025" deck STD cam bearing
• 400 mains 4.115" bore 9.025" deck STD cam bearing
• 350 mains 3.980" bore 9,025" deck 1.7/8 needle roller cam bearing
• 350 mains 4.115" bore 9.025" deck 1.7/8 needle roller cam bearing
• 400 mains 3.980" bore 9.025" deck 1.7/8 needle roller cam bearing
• 400 mains 4.115" bore 9.025" deck 1.7/8 needle roller cam bearing

Custom spec available at additional cost

• Custom deck height 8.750" to 9.200"
• Needle roller cam bearings 50mm and 55mm
• Lifter bores .842" .875" .903"
• Dedicated dry sump rear cap

Special features all oil gallery are machine for use of AN o ring style fittings

• Block is fully debured with no extra work required
• All block have been heat cycled with torque plates fitted to assure seating of sleeves is absolute
• All blocks inspected before shipping